|
Free Project
Sheet |
 |
Click on image
for a larger view |
|
Materials
Needed |
Accu-Cut®
Materials Needed:
Accu-Cut® MARK IV™ Roller Die Cutting Machine
Accu-Cut® Dies:
Moose #1A - Large #M1311L
Tree #1A - Small #T1292S
Tree #1A - Large #T1292L
Bear #3 - Small #B1384S
Bear #3 - Large #B1384L
Materials
for Optional Basket:
2 - Lara's Crafts Wood Fish #U11108
1 - Lara's Crafts Wood Sign #L20003
Small Basket
8" piece of 1/4" dowel
Floral Foam
DecoArt® Americana™ Acrylic Paints:
Buttermilk
Forest Green
Shading Flesh
DecoArt® Weathered Wood™
Ivy Greenery
Lo-Temp Glue Gun and Glue |
Other
Materials Needed for Shelf:
Rustic Relics Multi-Media Shelf #6606 from Lara's Crafts
1/4 yd. each of four coordinating green print fabrics
1/8 yd. of three different brown fabrics
HeatnBond® Iron-On Fusible Adhesive
DecoArt® Americana™ Acrylic Paint:
Salem Blue
Titanium White
Raw Sienna
Hauser Medium Green
1" flat paintbrush
ZIG® .05 Black Millennium™ Pen
ZIG® Chisel Tip Black Woodcraft™ Marker
Light Oak Water Based Wood Stain
Small Sponge
Cotton Cloth
White paper
Household Iron |
|
Project Instructions |
Shelf
Instructions:
- Remove birch
insert from shelf. Following the manufacturer's instructions
for use, apply stain to the shelf. Let stain dry thoroughly.
Paint sky area of the birch insert Salem Blue and the ground area Raw
Sienna. Sponge titanium White clouds on the sky. Drybrush
Hauser Medium Green on the ground area.
- Iron HeatnBond
to the wrong side of the fabrics. Using the Accu-Cut small and
large Tree #1A dies, cut a variety of Green fabric trees.
- Using the
small and large Bear #3 dies, cut one bear each from two different Brown
fabrics. Use the Moose #1A die to cut a moose from the remaining
Brown fabric. Dot the eyes of the bears and the moose with the
Black Millenium pen.
- Peel the
protective paper backing from the fabric shapes. Using the photo
as a guide, arrange the shapes on the birch insert. Overlap and
stagger the shapes to create dimension. Place White paper over the
shapes, then iron them in place with a medium hot iron. Replace
the birch insert in the shelf.
|
Click on image
for a larger view |
Basket
Instructions:
- Paint both
fish Buttermilk. Float the upper part of the fish with
Forest Green and the lower part with Shading Flesh. When fish are
dry, dot the eyes and draw scales with the Black Millenium pen.
- Paint the sign
Forest Green, let dry. Paint Weathered Wood on the sign, let dry.
Paint a coat of Buttermilk over the Weathered Wood. Let dry.
- After the sign
is completely dry, write the saying with the Black Woodcraft Marker.
- Glue the fish
to the basket front. Tie a jute bow and glue it to the
basket rim between the fish. Glue a piece of floral foam in the
basket. Arrange ivy greenery in the foam. Glue the sign to
the dowel then insert the bottom of the dowel into the foam.
|
